Valve Repair Kit Models

The SuperBowl electronics bowl is a battery or plugin operated solid and powder chemical dispenser for pot and pan, silver soak, or laundry applications. The circuit board has a programmable run time of 1 second to 10 minutes, built-in 2, 5, and 10-minute lockouts (or no lockout) and a mid-cycle shutoff.  It can be operated manually or automatically from a machine signal.

951 Flush Manifold dilutes concentrated product with water and delivers chemical solution to laundry machines in a safe and efficient manner. Flush manifold comes complete with optional solenoid valve, and up to eight chemical inlets. Inlets are either 3/8” push on or 3/8” barb fittings. Units can be field converted from one connection to another.

 The DEMA Chemical Measurement System (CMS) flow meter simplifies and maintains accurate chemical dosing for your Aurora laundry system. Installation and setup is quick and easy, with no calibration required. The CMS measures each chemical as it’s being dispensed into the laundry machine. Accuracy is achieved through the use of a flow meter with a continuous self-cleaning process. 

Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave. There are various types of check valves used in a wide variety of applications.

Add-on chemical storing racks to protect your chemicals.

DEMA’s 5800 V is the basic solid and powder product bowl for multiple applications.  It includes a wall mounting kit, bulkhead fitting for dish machine use, DEMA’s plastic siphon breaker and compression fittings.  A brass siphon breaker is also available (5800V.B).

Model 68-4 Faucet Adapter Kit 

Makes installing proportioning equipment over the sink clean and easy. The kit includes adapters for Chicago, Fisher, and T & S faucets. A pre-built manifold consisting of a tee, ball valve, and water hose allows user to control water flow to sink or dispenser.

Model 68.4.2
Includes Fisher adapters only and manifold assembly

Model 68.4.3
Includes Chicago adapters only and manifold assembly

Model 68.4.4
Includes T & S adapters only and manifold assembly

Model 68.21 
T & S Scrap hose sink adapter kit

Model 591 
Water diverter valve screws on end of faucet and diverts water to dispenser by pulling a plunger while water is turned on.

84.65.44 Low Level Alarm Sensor

DEMA’S Low Level Alarm is the low level and out-of-product alarm system that can be used as a stand-alone unit with virtually any dispenser or as an integral part of DEMA’s Trapper.  Its touch-less design isolates electronics from chemicals, eliminating chemical attack potential plus works with all chemistry regardless of conductivity.

Out of Product Alarm Sensor

84.65.48 Stand alone unit
84.65.49 Add-on unit for Atlas or V-Line OPL
84.65.64 Sensor with 3/8” x 3/8” barb fitting
84.65.65 Sensor with 3/8” x 3/8” JG fitting
84.65.66 Sensor with 3/8” x 1/4” JG fitting
84.65.67 Sensor with no fitting

DEMA offers standard metering tips to achieve dilutions from 4:1 to 1024:1 and leaner. Metering tips are available in standard or custom packs.

Designed to protect faucet backflow devices that are not rated for continuous supply pressure and to virtually eliminate hot and cold water cross connection. This device is tested and complies with ASSE 1055-1997 and required by some state and local  regulatory agencies. Check local plumbing  regulations for backflow and connection requirements.

All DEMA housekeeping dispensers use the same proportioners, backflow preventers and metering tips. Proportioners are available with flow rates of 4 gpm (15 LPM), 2.5 gpm (9.5 LPM) and 1 gpm (4 LPM). Standard proportioners are equipped with ASSE 1055 approved 16-30 Action Gap backflow preventers. Air gap backflow prevention is available with a 4, 2.5 and 1 gpm proportioner.