MixRite Industrial Water Driven Injectors

DEMA MixRite Water Driven Injectors are water-powered proportioning pumps that need no electricity that accurately dispenses at different water pressure and water flows. Ideal for in-line injection. Available in several types of models with a wide variety of injection rates and different materials to withstand many types of aggressive acids, alkaline, and solvents. The 500 series is available as a CW model with seals and components for mildly aggressive additives, 1400 models for corrosive material, acid, alkaline, solvent, and a PVDF model for the most aggressive additives.

*For additional MixRite information for Agricultural Applications, please see our MixRite Reference page below:

-> MixRite Reference Page

Features & Benefits

Models

Accessories

Resources

Chemically resistant nylon reinforced fiberglass body on all models (PVDF body for PVDF model)
CW models feature stainless steel springs
1400 and PVDF models feature Hastelloy springs
Chemical shutoff on 569, 571, 573, 577IN, 579IN, and M units
Easily replaceable wear parts
Larger operating ranges from 2.9 PSI to 120 PSI
Hose barbs with swivel for easy installation
Injection from 1,000:1 to 10:1 (.1% to 10%), depending on model
Operating pressure ranges from 3 to 120psi
Flow rate from .08 to 11 gallons per minute (500 series)
Flow rate from .08 to 14 gallons per minute (1400 series)
Includes inlet tubing with filter strainer
Dimensions: 19 1/2″ high, 7″ wide
Optional tip Kit for dilutions from 750:1 to 2000:1 used with 570, 571

Model No.	Flow Rate	Induction Rates	Induction %	Oz/Gal	mL/Gal	Chemical Shut-Off
569*	.5 – 11 GPM (3.4 – 41.6 LPM)	1000:1 to 111:1	.1% to .9%	.128 – 1.15	3.84 – 34.5	Yes
570*	.5 – 11 GPM (3.4 – 41.6 LPM)	333:1 to 50:1	.3% to 2%	.4 – 2.56	12 – 76.8	No
571*	.5 – 11 GPM (3.4 – 41.6 LPM)	333:1 to 50:1	.3% to 2%	.4 – 2.56	12 – 76.8	Yes
572	.5 – 11 GPM (3.4 – 41.6 LPM)	250:1 to 25:1	.4% to 4%	.5 – 5.12	15 – 153.6	Yes
573*	.5 – 11 GPM (3.4 – 41.6 LPM)	250:1 to 25:1	.4% to 4%	.5 – 5.12	15 – 153.6	Yes
577IN	.5 – 11 GPM (3.4 – 41.6 LPM)	333:1 to 50:1	.3% to 2%	.4 – 2.56	12 – 76.8	Yes
579IN	.5 – 11 GPM (3.4 – 41.6 LPM)	250:1 to 25:1	.3% to 4%	.4 – 5.12	15 – 153.6	Yes
1400A or M	.5 – 14 GPM (.5 – 53 LPM)	200:1 to 500:1	.05% to .2%	.04 – .25	1.2 – 7.5	M Model
1401A or M	.5 – 14 GPM (.5 – 53 LPM)	1000:1 to 111:14	.1% to .9%	.128 – 1.15	3.84 – 34.5	M Model
1402A or M	.5 – 14 GPM (.5 – 53 LPM)	333:1 to 50:1	.3% to 2%	.4 – 2.56	12 – 76.8	M Model
1405A or M	.5 – 14 GPM (.5 – 53 LPM)	100:1 – 20:1	.5% to 5%	.64 – 6.4	19.2 – 192	M Model
1410A or M	.5 – 14 GPM (.5 – 53 LPM)	100:1 – 10:1	1% to 10%	1.28 – 12.8	38.4 – 384	M Model

* Models starred above available in PVDF if needed. Shown above are the most common configurations. Many additional configurations are readily available, contact us at sales@demaeng.com or speak with your DEMA sales representative for more information.

Ultra-Lean Metering Tip Kit

Strainer

3/4” Anti-Siphon Kit

3/4” Pressure Regulator & Gauge

3/4” Check Valve

UFR – Low Flow Booster

Water Supply Hoses

Ultra Lean Metering Kit

- The DEMA #57.11.1 metering tip kit achieved leaner dilutions from 750:1 to 2000:1. This kit includes four different sized metering tips, 8’ (2.4m) of 1/4” vinyl tubing and a 3/8” barb adapter. Kit designed to work with 570/571 units.
- This kit includes four different sized metering tips, 8’ (2.4m) of 1/4” vinyl tubing and a 3/8” barb adapter. Kit designed to work with 570/571 units.

Strainer

Strainer

- The DEMA #50.41.1 3/4” NPT strainer is an in-line 200 mesh (80 microns) strainer recommended for all MixRite installations. The in-line strainer will keep debris out of the MixRite unit, increasing the life of the seals.

3/4” Anti-Siphon Kit

3/4” Anti-Siphon Kit

- For any 3/4” MixRites in-line to relieve pressure so chemical will not siphon out of drum or tank. DEMA #36073008002

3/4” regulator and gauge

Pressure Regulator & Gauge

- Fits in line with any MixRite to limit pressure spikes. DEMA #38030200001 for pressure regulator and 93.15.1 for gauge.

3/4” Check Valve

3/4” Check Valve

- DEMA #57.20.8, 3/4” check valve helps limit backflow situations if the unit is used to pump the mixture any significant distance.

UFR – Low Flow Booster

UFR – Low Flow Booster

- The 57.UFR low flow booster works with any 500 series MixRite to take low flows (less than .9gpm) and allows the unit to work in low flow conditions.

Water Supply Hoses

Water Supply Hoses

- DEMA manufacturers a variety of water inlet hoses for different applications. DEMA inlet hoses are rated to 200psi, made of durable double-walled rubber, and crimped to our manufacturing facility specifications. Refer to the DEMA water supply hose guide included in the Resources section of this product page for more information.

Product

MixRite Industrial Water Driven Injectors

Model No.

566AG

Resource No. / Description

Brochure

Product

MixRite Industrial Water Driven Injectors

Model No.

568AG

Resource No. / Description

Brochure