500 Series Water Driven Injectors

The MixRite 500 Series Water Driven Injectors are designed for water flow up to 11 gpm (2.5m3/hr) and will operate from .8 to 11 gpm (3-41 L per min.). The 500 series is available as a CW model with seals and components for mildly aggressive additives, CL models for corrosive materials, acids, alkalines and solvents and a PVDF model for the most aggressive additives.

     
 
CW Models
CL Models
PVDF Models
   
   
Model No.
Induction Rates
Chemical Shut-Off
Available Models
569
1000/1 to 115/1 .1% to .9%
Yes
CW, CL, PVDF
570
384/1 to 50/1 .3% to 2%
No
CW, CL, PVDF
571
384/1 to 50/1 .3% to 2%
Yes
CW, CL, PVDF
572
250/1 to 25/1 .4% to 4%
No
CW, CL, PVDF
573
250/1 to 25/1 .4% to 4%
Yes
CW, CL, PVDF
574
33/1 to 10/1 3.% to 10%
No
CW, CL
575
33/1 to 10/1 3.% to 10%
Yes
CW, CL
576IN
384/1 to 50/1 .3% to 2%
No
Internal By-pass
577IN
384/1 to 50/1 .3% to 2%
Yes
Internal By-Pass
578IN
250/1 to 25/1 .4% to 4%
No
Internal By-Pass
579IN
250/1 to 25/1 .4% to 4%
Yes
Internal By-Pass

All 500 Series Models have a Flow Rate of .9 to 11 GPM